TMT HIGHTECH KFT - Termékeink

Termékek

Aluminium megvágáslap

Újabb alumínium öntödei szerszám készült el. Magas minőség precizitásunk ezen a szerszámon is megtalálható.

Használt gépek listája

Egyre több használt gépünk kerül fel az oldalunkra, bővebb információ érdekében keressen minket telefonon vagy e-mailben.

Model 400D

Termék leírása:

SPECIFICATION	mm (in.)
Height Under Guide	215mm 8-1/2"
Throat, Band to Column	400mm 15-3/4"
Blade Speed	20-376m/min 65-1233ft/min
Blade Width	3-15mm 1/8"-5/8"
Blade Length	3300mm 129-7/8"
Size of Table	600×560mm 23-5/8"×22"
Tilt, Main Table	5° R, 5° L
Motor	2HP
N0. of "T" Slots in Table	4
Table Stroke	260mm 10-1/4"
Table Feed Operation	Electric Powered
Machine Size	1015×1040×1880mm 40"×40-7/8"×74"
Net Weight	580kgs 1276lbs
Ship Weight	670kgs 1474lbs
Packing Size	1010×910×2000mm 39-3/4"×35-7/8"×78-3/4"
STANDARD FEATURES/ACCESSORIES:
Blade welder, shear, grinder, work light, blade guides, chip blower, cleaning brush, rip fence, 4 "T" slots in table ,infinitely variable speed, rubber bonded saw wheels , magnetic switches , electric powered table, 110 volt control & lighting.
OPTIONAL ACCESSORIES:
Circle Cutting Attachment Miter Gauge

STANDARD MACHINE FEATURES:

Infinitely variable speed.
The band tension is cushioned.
Blade welder and grinder are front mounted for quick, accurate blade repair and installation.
Interchangeable rubber bonded saw wheels.
Brush for cleaning lower drive wheel.
Manintenance-free airpump provides air to remove chips from the point of cut.
The upper wheel could be adjusted for band tensioning.
Hand wheel controlled speed.
Adjustable saw blade guides.
Machine light is fitted.
Change speeds while the machine is in operation, without stopping, without pulley changes.
Cast iron frame to minimize machine vibration.
The machine is with a device for automatic linear cutting.
Work table may take speedy reverse movement.
Moton of work table is controlled by stepless speed controller.
Work table is with auto stoppers.