Tel.: 06-33/416-787
MagyarEnglishDeutschRomânesteSlovenský
Termékek
Low cost Forgókosaras mosó
ARCBRO CNC PLASMA/LÁNG VÁGÓ
JESCO ESZTERGÁK
PanBlast Szmecsefúvók
Hero-Laser lézer berendezések
T-JAW Fürészgép
Köszörű tartozékok
Excetek Szikraforgácsoló gépek
Szikraforgácsoló Fogyóeszközök Yougar
Szikraforgácsoló Alkatrészek
Szikraforgácsoló Huzal
Szikraforgácsoló Szűrők
Szikraforgácsoló tömb anyagok
Dosatron
Start Lyukfúró gépek YOUGAR
Használt gépek
TEKNOX Mosóberendezések
GUYSON Mosóberendezések
GUYSON Szemcseszóró berendezések
Aluminium megvágáslap
Aluminium megvágáslap
Újabb alumínium öntödei szerszám készült el. Magas minőség precizitásunk ezen a szerszámon is megtalálható.
Tovább olvasok...
Használt gépek listája
Használt gépek listája
Egyre több használt gépünk kerül fel az oldalunkra, bővebb információ érdekében keressen minket telefonon vagy e-mailben.
Tovább olvasok...

Magas Precizitású Gyors Esztergák

Tételek: 1 - 30 / 8 (1 oldal)
BRAVE Series
BRAVE Series
Safety, Efficiency Operation. Rugged, Heavy Duty Use. Easy Maintenance. Accuracy Turning.
GENERAL-LATHE Series
GENERAL-LATHE Series
Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock for high speed running at low noise. Camlock spindle nose. Variable-speed drive from 10-1400rpm in 4 variable-ranges Double walls apron as oil bath. Interlock device between feeding and threading. Smooth, easy speed change selection. Feed rod fitted with an overload clutch for safety. Easy longitudinal & cross feed change operated by a push/pull plunger on apron. Simple, fast, pull up engage, push down disengage, feed control lever. Front moveable chip tray allows easy chip cleaning.
MAJOR Series
MAJOR Series
Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock for high speed running at low noise. Camlock spindle nose. Double walls apron as oil bath. Interlock device between feeding and threading. Smooth, easy speed change selection. Feed rod fitted with an overload clutch for safety. Easy longitudinal & cross feed change operated by a push/pull plunger on apron. Simple, fast, pull up engage, push down disengage, feed control lever. Front moveable chip tray allows easy chip cleaning.
KNIGHT Series
KNIGHT Series
Full geared headstock with 16 spindle speeds from 25-2000rpm. D1-6 camlock spindle nose. Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock. Main spindle with GAMET Bearings supported. Equipped with „Matrix“ mechanical multi-plate clutch. Saddle slideways on bed coated with Germany made moglice for anti-friction. Front moveable chip tray easily for chip collection and cleaning. CE Compliance
CHAMPION Series
CHAMPION Series
Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock for high speed running at low noise. Camlock spindle nose. Double walls apron as oil bath. Interlock device between feeding and threading. Smooth, easy speed change selection. Feed rod fitted with an overload clutch for safety. Easy longitudinal & cross feed change operated by a push/pull plunger on apron. Simple, fast, pull up engage, push down disengage, feed control lever. Front moveable chip tray allows easy chip cleaning.
STUDTURN Series
STUDTURN Series
Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock for high speed running at low noise. Camlock spindle nose. Double walls apron as oil bath. Interlock device between feeding and threading. Smooth, easy speed change selection. Feed rod fitted with an overload clutch for safety. Easy longitudinal & cross feed change operated by a push/pull plunger on apron. Simple, fast, pull up engage, push down disengage, feed control lever. Front moveable chip tray allows easy chip cleaning.
TRAINER Series
TRAINER Series
Full geared headstock with 16 spindle speeds from 53-2000rpm. D1-4 camlock spindle nose or DIN 55027. Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock for high speed running at low noise. Camlock spindle nose. The gears in gearbox are hardened and self-splash lubricated as oil bath. Feeding and threading function are interlocked to prevent setting simulaneously. Feeding direction and engagement are controlled by two push/pull plunger on apron. Front moveable chip tray easily for chip collection and cleaning. Adjustable controller to prevent over-travel for safety protection. Foot brake pedal to apply quick stop and power off. Lockabel tool drawers. CE Compliance.
PRINCE Series
PRINCE Series
Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock for high speed running at low noise. Camlock spindle nose. Double walls apron as oil bath. Interlock device between feeding and threading. Smooth, easy speed change selection. Feed rod fitted with an overload clutch for safety. Easy longitudinal & cross feed change operated by a push/pull plunger on apron. Simple, fast, pull up engage, push down disengage, feed control lever. Front moveable chip tray allows easy chip cleaning.
Oldaltérkép
Partnereink
Kapcsolat