Tel.: 06-33/416-787
MagyarEnglishDeutschRomânesteSlovenský
Products
Low cost washers WORKSHOP Division
ARCBRO CNC PLASMA/FLAME CUTTER
JESCO LATHES
PanBlast Blating equipment
Hero-Laser Laser
T-JAW Band Saw
Grinding machine parts
Excetek Szikraforgácsoló gépek
YGS Consumable
EDM Parts
EDM Wire
EDM Filters
EDM Raw Materials
Dosatron
Start Lyukfúró gépek YOUGAR
Used Machines
TEKNOX Mosóberendezések
GUYSON Mosóberendezések
GUYSON Szemcseszóró berendezések
Aluminium injection tool
Aluminium injection tool
Újabb alumínium öntödei szerszám készült el. Magas minőség precizitásunk ezen a szerszámon is megtalálható.
Read more...
Used machines
Used machines
Egyre több használt gépünk kerül fel az oldalunkra, bővebb információ érdekében keressen minket telefonon vagy e-mailben.
Read more...

High Speed Precision Lathes

Tételek: 1 - 30 / 8 (1 oldal)
BRAVE Series
BRAVE Series
Safety, Efficiency Operation. Rugged, Heavy Duty Use. Easy Maintenance. Accuracy Turning.
GENERAL-LATHE Series
GENERAL-LATHE Series
Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock for high speed running at low noise. Camlock spindle nose. Variable-speed drive from 10-1400rpm in 4 variable-ranges Double walls apron as oil bath. Interlock device between feeding and threading. Smooth, easy speed change selection. Feed rod fitted with an overload clutch for safety. Easy longitudinal & cross feed change operated by a push/pull plunger on apron. Simple, fast, pull up engage, push down disengage, feed control lever. Front moveable chip tray allows easy chip cleaning.
MAJOR Series
MAJOR Series
Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock for high speed running at low noise. Camlock spindle nose. Double walls apron as oil bath. Interlock device between feeding and threading. Smooth, easy speed change selection. Feed rod fitted with an overload clutch for safety. Easy longitudinal & cross feed change operated by a push/pull plunger on apron. Simple, fast, pull up engage, push down disengage, feed control lever. Front moveable chip tray allows easy chip cleaning.
KNIGHT Series
KNIGHT Series
Full geared headstock with 16 spindle speeds from 25-2000rpm. D1-6 camlock spindle nose. Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock. Main spindle with GAMET Bearings supported. Equipped with „Matrix“ mechanical multi-plate clutch. Saddle slideways on bed coated with Germany made moglice for anti-friction. Front moveable chip tray easily for chip collection and cleaning. CE Compliance
CHAMPION Series
CHAMPION Series
Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock for high speed running at low noise. Camlock spindle nose. Double walls apron as oil bath. Interlock device between feeding and threading. Smooth, easy speed change selection. Feed rod fitted with an overload clutch for safety. Easy longitudinal & cross feed change operated by a push/pull plunger on apron. Simple, fast, pull up engage, push down disengage, feed control lever. Front moveable chip tray allows easy chip cleaning.
STUDTURN Series
STUDTURN Series
Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock for high speed running at low noise. Camlock spindle nose. Double walls apron as oil bath. Interlock device between feeding and threading. Smooth, easy speed change selection. Feed rod fitted with an overload clutch for safety. Easy longitudinal & cross feed change operated by a push/pull plunger on apron. Simple, fast, pull up engage, push down disengage, feed control lever. Front moveable chip tray allows easy chip cleaning.
TRAINER Series
TRAINER Series
Full geared headstock with 16 spindle speeds from 53-2000rpm. D1-4 camlock spindle nose or DIN 55027. Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock for high speed running at low noise. Camlock spindle nose. The gears in gearbox are hardened and self-splash lubricated as oil bath. Feeding and threading function are interlocked to prevent setting simulaneously. Feeding direction and engagement are controlled by two push/pull plunger on apron. Front moveable chip tray easily for chip collection and cleaning. Adjustable controller to prevent over-travel for safety protection. Foot brake pedal to apply quick stop and power off. Lockabel tool drawers. CE Compliance.
PRINCE Series
PRINCE Series
Rigid construction bed are induction hardened over HRC50 and with precision ground. Harden and ground spindle & gears in headstock for high speed running at low noise. Camlock spindle nose. Double walls apron as oil bath. Interlock device between feeding and threading. Smooth, easy speed change selection. Feed rod fitted with an overload clutch for safety. Easy longitudinal & cross feed change operated by a push/pull plunger on apron. Simple, fast, pull up engage, push down disengage, feed control lever. Front moveable chip tray allows easy chip cleaning.
Sitemap
Partners
Contact